r, cable descramblers, universal cable descramblers, universal cable descrambler, cable tv descrambler, cable descrambler box
x

For Analog Descrambler (cable box)

Q: Certain channels do not come in clearly?
Please try one of the answers below.
A1: Use the CFT button first and then push the F+ and F- buttons on the remote to fine-tune the picture.

A2:Try the different frequency settings HRC,STD,and IRC located on the bottom of the box.

A3:Try hooking up the box to the main cable line in the house.

A4:Most cases are you don't have basic cable or you have digital. You must be subscribed to extended basic cable for the unit to work to its full capacity. The unit will not function on digital cable.

Q: Every time I go back to one pay channel I have to tune it again, how can I stop that!
A: All you have to do is tune it again using the F+ and F- buttons, once you get it how you like it you will have to push the MEM button followed by pushing the F+ button to save those settings.

Q: The picture looks like a negative or x-ray, what is it and how do I fix it?
A1: It's inversion, just click MEM1 button on the remote to invert the picture back to normal color.

A2:Sometimes the channel inverts by mistake to fix this just go up and down on the channel until it becomes normal again.

Q: I've hit the MEM1 button on the remote but the picture flashes back to a negative every minute or so, what's up?
A: You have rapid random inversion, the analog descrambler will not work for you.

Q: Some channels are fine, but others are still scrambled and I can't tune them in at all, why does this happen?

A: You might be on a multi-mode system, and you need to change the frequency, to HRC or STD (comes set on STD), then hit the CFT button on each channel. On the Tristar Masterpiece the switch is on the bottom of the box.

Q: There are some channels where I get nothing, is there something wrong with the box?

A: You most likely do NOT have a live station on every channel on the dial. The Tristar Masterpiece is made to handle all cable systems, average number of channels is around 60, but some have as many as 90 and up (analog).

Q: Basic stations are grainy, snowy, or poor quality OR I have to fine tune every time I switch channels OR all the channels come in except channels 5 & 6 OR only channels 5 & 6 come in OR numerous channels are only received in black and white.
A1: Make sure your TV and the box are set on the correct channel (3 or 4), turn off the power and change the setting on the back of the box. Also make sure you don't have a Blocker on your line. You must be subscribed to extended basic cable for the unit to work to its full capacity.

A2:Check the frequency settings HRC,STD,and IRC located on the bottom of the box.

Q:I get more than one pay channels but one does not come in so well how can I fix this?

A1:The video card that is installed into the box needs to be tuned. Please contact us via email at sales@cableboxking.com.

Q:Why do I get no sound on some channels?

A1:Make sure the box has the volume up or have the mute off.

A2:Make sure the tv has the volume up or have the mute off.

A3:Please contact us via email at sales@cableboxking.com

Q: I get absolutely nothing, no channels at all. What am I doing wrong?

A1:Make sure that you properly plug the unit into the cable going from the house then to the tv.

A2:Try changing the channel on the tv up and down or unplugging the unit then plugging it back in again.

A3: Make sure your TV and the box are set on the correct channel (3 or 4). You may have Digital cable and our box will not work on that system. You will need to contact your cable company and tell them that you would like to go back with Analog cable services. You will then get all the channels you need. If you don't have digital you will need to follow the step above.

Q:The box is stuck on one channel only and won't change no matter what I do how can I solve this?

A:Most likely the problem is you stored only one channel into favorites to fix this press the button FAV on the remote.

Q:Some channels don't come and I'm also seeing "LOC" displayed on the box how do I fix this?

A:You have the channel locked with parental lock to fix this press the button plock then press then following buttons 2 9 9 9 .

Q:I have problems getting the frequency settings to work?

A: After you switch the setting unplug the box then plug the unit back in.

Still having problems? Contact us via email at sales@cableboxking.com. Please be very descriptive with all emails. We will solve your problem but we need to understand what the problem is.